Many companies and individuals often use tape products , so everyone knows how tape products are produced? Wuhu Hengfan Commerce and Trade tells everyone about the production process of Wuhu tape products !
1. The entire process of tape production is: the raw materials of plastic particles are added to the film blowing machine and blown into a plastic film, the width is generally about 1.3M. According to the use of the tape, then different plastic particles are selected and some special additives are added.
2. After the film is blown, apply the glue to the film on the coating machine. In fact, this process is mainly based on the viscosity and use of the tape to select the glue. After the coating is completed, it is the tape. But the current is still The width is 1.3M, and the length is several hundred M. There is a large roll of plastic film, which has not been separated.
3. The next step is to rewind the large roll of plastic film into a small roll through a rewinding machine. This can be rerolled according to the length of the tape we usually use.
4. The rewinded small film can be cut with a slitter to the width required by the usual tape, such as 1CM width or other widths are possible. The most important part of the production of adhesive tape to see the quality is blowing Film and coating two processes. Because these two processes come out as semi-finished products, and the subsequent rewinding. Cutting these have a smaller impact on the tape.
The above is the production process of Wuhu tape products shared by Hengfan Business! Hope to answer your questions!